• Please make sure you are familiar with the forum rules. You can find them here: https://forums.tripwireinteractive.com/index.php?threads/forum-rules.2334636/
  • Weve updated the Tripwire Privacy Notice under our Policies to be clearer about our use of customer information to come in line with the EU General Data Protection Regulation (GDPR) rules that come into force today (25th May 2018). The following are highlights of our changes:


    We've incorporated the relevant concepts from the GDPR including joining the EU and Swiss Privacy Shield framework. We've added explanations for why and how Tripwire processes customer data and the types of data that we process, as well as information about your data protection rights.



    For more information about our privacy practices, please review the new Privacy Policy found here: https://tripwireinteractive.com/#/privacy-notice

[Mutator] ServerEx (white-listed)

Ducky

Super Moderator
May 22, 2011
6,358
237
0
Netherlands
If nothing is present in that drop-down menu, then it means you did not install the mutator correctly. Please make sure that you have placed all the files at the right location.
 

G_Sajer

FNG / Fresh Meat
Sep 4, 2011
2,389
132
0
Minnesota
:)

I'll go over it again. There is a fourth file included the location of which is not described in the setup script. It is ROServEX.ini. I assume it goes in the config directory also?
 

Ducky

Super Moderator
May 22, 2011
6,358
237
0
Netherlands
That file shouldn't be in the package. You can leave it out or place it in the Config folder. It doesn't really matter, because if it's not present, then a new ROServerEx.ini will be created the first time the mutator is started. What is important is that the DefaultServerEx.ini is present in the Config folder.

Edit:
I've removed the ROServerEx.ini file from the package.
 
Last edited:

G_Sajer

FNG / Fresh Meat
Sep 4, 2011
2,389
132
0
Minnesota
:confused:

Well, I have managed to get it running on Crucible, I followed the simple instructions to the letter. All files are where they should be, but try as I may, I can find no way to access the edit/review tools. Worse, when it runs it blows away all the bots, and I have no way to edit this behavior as yet. Now to be fair I don't think there is anything wrong with the program, as Butch has been able to get it to run elsewhere. I think the problem is on my end. There is something I need to know about about this configuration to make editing possible that I do not currently understand. So I've turned it off until I can get
some assistance. No matter how many times I punch that edit button, I don't even get so much as a doorbell ring. ;)
 

evilpikka

FNG / Fresh Meat
Dec 13, 2013
11
0
0
Hello,

Is there any possibility to start the ServerEX mutator through the ini file, so its always active ?
For the moment when i start it over the WebAdministrator it stops working after some time (several map changes, can't give an exact number), dunno why ?

Thankx for any advice
 

Ducky

Super Moderator
May 22, 2011
6,358
237
0
Netherlands
Starting through an ini file isn't possible. Such a feature doesn't exist in the UE3 version used for RO2. You can however start it by modifying your command line. More about that can be found in the OP of this thread.

If you only have limited edit access to your command-line, then I advice to this mutator in combination with the SmartLoader mutator. Then you only need to start that mutator from the command line and start ServerEx from out of the SmartLoader configuration page. In that case SmartLoader will start ServerEx each time a new map starts.
 

evilpikka

FNG / Fresh Meat
Dec 13, 2013
11
0
0
Hello,

We got a new server with ftp access.
Yesterday I copied the 3 files in the stated folders (server stoppped) then restarted server. ServerEx is turned on on first mapchange but server is going offline after 4-5 minutes.
Tried to restart Server about 10x, always goes down after 4-5 minutes.
Removed the Serverex files from the server, server is running for a whole day without shuting down.
Tried the same today, same problem, server down after 4-5 minutes.
Any ideas or suggestions ?
 

Ducky

Super Moderator
May 22, 2011
6,358
237
0
Netherlands
Hello,

We got a new server with ftp access.
Yesterday I copied the 3 files in the stated folders (server stoppped) then restarted server. ServerEx is turned on on first mapchange but server is going offline after 4-5 minutes.
Tried to restart Server about 10x, always goes down after 4-5 minutes.
Removed the Serverex files from the server, server is running for a whole day without shuting down.
Tried the same today, same problem, server down after 4-5 minutes.
Any ideas or suggestions ?
Never did see that with this mutator. Do you mean the server crashes?

Can you set bEnableLogging to True in the ROServerEx.ini file and then restart the server. Wait 'till it crashes and attach the servers log file to a post?
 

evilpikka

FNG / Fresh Meat
Dec 13, 2013
11
0
0
Never did see that with this mutator. Do you mean the server crashes?

Can you set bEnableLogging to True in the ROServerEx.ini file and then restart the server. Wait 'till it crashes and attach the servers log file to a post?
Hello Ducky,
thankx for quick reply.
The server crashed yesterday, I had checked all files and folders several times, every file was where it should be.
I reinstalled the ServerEx today , after first crash i changed the bEnableLogging to True. I don't know why but by changing that value the server didn't crash anymore, it's on for about 10 hours now with mutator running.
Strange world
 

Ducky

Super Moderator
May 22, 2011
6,358
237
0
Netherlands
As a test I added the mutator to a fresh installed server. It starts without problem at my end. Please post your servers log file.
 

demiro86

FNG / Fresh Meat
Sep 30, 2014
41
0
0
hnhitaclan.forumfree.it
Code:
Log: Log file open, 09/17/11 23:39:58
Init: WinSock: version 1.1 (2.2), MaxSocks=32767, MaxUdp=65467
Init: Version: 7258
Init: Epic Internal: 0
Init: Compiled (32-bit): Sep 17 2011 10:47:09
Init: Changelist: 641002
Init: Command line: SERVER TE-Apartments?MinPlayers=0?MaxPlayers=14 -seekfreeloadingserver -multihome=62.149.197.159 -port=7787 -log=serverlog.log
Init: Base directory: E:\UserFile\ADMIN\GameServers\TC28114667532641834130480\binaries\win32\
Log: Patching Engine ini...
[0000.82] Init: Computer: GAMESCLAN159
[0000.83] Init: User: SYSTEM
[0000.83] Init: CPU Page size=4096, Processors=4
[0000.83] Init: High frequency timer resolution =3400.180000 MHz
[0000.83] Init: Memory total: Physical=2.0GB Pagefile=5.9GB Virtual=2.0GB
[0000.83] Log: STEAMWORKS initialized 0
[0000.83] Init: Presizing for 33476 objects not considered by GC, pre-allocating 0 bytes.
[0001.07] Init: Object subsystem initialized
[0001.23] Warning: Warning, Unknown language extension . Defaulting to INT
[0001.38] Log: Shader platform (RHI): PC-D3D-SM3
[0002.33] Log: PhysX GPU Support: ENABLED
[0010.68] Warning: Warning, Failed to load Outer for resource 'ReturnValue': Function OnlineSubsystemSteamworks.OnlineSubsystemSteamworks:RegisterLocalTalker
[0010.72] Warning: Warning, Failed to load Outer for resource 'ReturnValue': Function OnlineSubsystemSteamworks.OnlineSubsystemSteamworks:ResetStats
[0010.87] Warning: Warning, Failed to load Outer for resource 'ReturnValue': Function OnlineSubsystemSteamworks.OnlineSubsystemSteamworks:GetNumberOfCurrentPlayers
[0011.05] Warning: Warning, Failed to load Outer for resource 'ReturnValue': Function OnlineSubsystemSteamworks.OnlineSubsystemSteamworks:GetCurrentVOIPLevel
[0011.14] Warning: Warning, Failed to load Outer for resource 'ReturnValue': Function OnlineSubsystemSteamworks.OnlineSubsystemSteamworks:HasRO1License
[0011.15] Warning: Warning, Failed to load Outer for resource 'ReturnValue': Function OnlineSubsystemSteamworks.OnlineSubsystemSteamworks:HasRO2Preorder
[0011.15] Warning: Warning, Failed to load Outer for resource 'ReturnValue': Function OnlineSubsystemSteamworks.OnlineSubsystemSteamworks:HasRO1License
[0011.15] Warning: Warning, Failed to load Outer for resource 'ReturnValue': Function OnlineSubsystemSteamworks.OnlineSubsystemSteamworks:HasRO2Preorder
[0014.10] Warning: Invalid movie stream data for TextureMovie ui_videos.german_sp_loop
[0014.10] Warning: Invalid movie stream data for TextureMovie ui_videos.LoadScreen_Community
[0014.10] Warning: Invalid movie stream data for TextureMovie ui_videos.MainMenu1
[0014.10] Warning: Invalid movie stream data for TextureMovie ui_videos.soviet_sp_loop
[0014.76] Log: 124388 objects as part of root set at end of initial load.
[0014.76] Log: 0 out of 0 bytes used by permanent object pool.
[0014.78] Log: Executing Class Engine.ServerCommandlet
[0014.78] Log: Initializing Game Engine...
[0014.78] Warning: StaticLoadObject for Texture2D EngineMaterials RandomMirrorDisc couldn't find object in memory!
[0014.79] Warning: Warning, Failed to load 'Texture2D EngineMaterials.RandomMirrorDisc': Failed to find object 'Texture2D EngineMaterials.RandomMirrorDisc'
[0014.79] Warning: StaticLoadObject for Font ui_fonts Font_Small couldn't find object in memory!
[0014.79] Warning: Warning, Failed to load 'Font ui_fonts.Font_Small': Failed to find object 'Font ui_fonts.Font_Small'
[0014.79] Warning: StaticLoadObject for Font ui_fonts Font_Small couldn't find object in memory!
[0014.79] Warning: Warning, Failed to load 'Font ui_fonts.Font_Small': Failed to find object 'Font ui_fonts.Font_Small'
[0014.79] Warning: StaticLoadObject for Font ui_fonts Font_Small couldn't find object in memory!
[0014.79] Warning: Warning, Failed to load 'Font ui_fonts.Font_Small': Failed to find object 'Font ui_fonts.Font_Small'
[0014.79] Warning: StaticLoadObject for Font ui_fonts Font_Small couldn't find object in memory!
[0014.79] Warning: Warning, Failed to load 'Font ui_fonts.Font_Small': Failed to find object 'Font ui_fonts.Font_Small'
[0014.80] Warning: StaticLoadObject for Font ui_fonts Font_Chat couldn't find object in memory!
[0014.80] Warning: Warning, Failed to load 'Font ui_fonts.Font_Chat': Failed to find object 'Font ui_fonts.Font_Chat'
[0014.85] Log: Looking for DLC...
[0014.92] Log: Steamworks is unavailable
[0014.93] Log: LoadMap: TE-Apartments?Name=Player?Team=255?MinPlayers=0?MaxPlayers=14
[0015.67] Log: Game class is 'ROGameInfoTerritories'
[0015.82] Log: NetMode is now 1
[0015.98] Log: Primary PhysX scene will be in software.
[0015.98] Log: Creating Primary PhysX Scene.
[0015.99] Log: Bringing World TE-Apartments.TheWorld up for play (20) at 2011.09.17-23.40.13
[0017.47] Log: Initializing Steam game server (Server ID is steam.90071992547409920)
[0029.19] Log: Bringing up level for play took: 13.353783
[0029.19] Log: Flushing async loaders.
[0033.21] Log: Terrain::PostLoad> CachedMaterial failed to compile? Forcing re-compilation of materal TerrainMaterialResource:TMAT_cracked_concrete_M+TMAT_M_FOC_Dirt_DirtBase01
[0033.23] Log: Terrain::PostLoad> CachedMaterial failed to compile? Forcing re-compilation of materal TerrainMaterialResource:TMAT_Leaves_and_garbage_M+TMAT_cracked_concrete_M+TMAT_M_FOC_Dirt_DirtBase01
[0033.23] Log: Terrain::PostLoad> CachedMaterial failed to compile? Forcing re-compilation of materal TerrainMaterialResource:TMAT_Leaves_and_garbage_M+TMAT_artillery_hole_01_M+TMAT_cracked_concrete_M+TMAT_M_FOC_Dirt_DirtBase01
[0033.23] Log: Terrain::PostLoad> CachedMaterial failed to compile? Forcing re-compilation of materal TerrainMaterialResource:TMAT_artillery_hole_01_M+TMAT_cracked_concrete_M+TMAT_M_FOC_Dirt_DirtBase01
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6038).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3296).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3290).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_2661).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_7821).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3267).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_1381).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_1390).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3221).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_1263).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_1277).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_2541).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_404).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_7122).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3275).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_279).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_592).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_1255).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_593).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_1230).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_597).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3996).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_1192).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3223).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3241).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6045).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_312).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_110).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_60).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_870).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3283).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3277).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_268).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3287).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3288).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6052).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3276).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_672).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3285).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3274).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6046).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_897).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_974).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3284).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3294).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_55).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6830).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6836).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3292).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6037).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3297).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3298).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3300).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_2009).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3299).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_8321).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_59).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6196).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_8320).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_8313).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_2007).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3305).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6024).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_2053).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6021).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6023).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6033).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_2168).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_2008).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6025).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3258).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_2273).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6032).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3644).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3781).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3877).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3875).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6029).
[0039.33] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3880).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_7851).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6035).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6036).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3945).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6167).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6168).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3991).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3992).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3993).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3306).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3881).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3999).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3998).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_4000).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3997).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6022).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3303).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_2542).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_2051).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6026).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6027).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_2648).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6031).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6030).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6028).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_968).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3878).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6034).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_2123).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3882).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3883).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_8318).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3295).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_408).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_659).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_8298).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6040).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3240).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6044).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6047).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6048).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6050).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6051).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6049).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_673).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6053).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6054).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_3286).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_8312).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_6670).
[0039.34] Log: No mesh was created (TexPropPlane) (Owner: StaticMeshActor_33
 

Ducky

Super Moderator
May 22, 2011
6,358
237
0
Netherlands
In that log no reference if present that indicates that you are trying to start the ServerEx mutator. It's also not on your servers command line. According the log, this is your current command-line:
Code:
Init: Command line: SERVER TE-Apartments?MinPlayers=0?MaxPlayers=14 -seekfreeloadingserver -multihome=62.149.197.159 -port=7787 -log=serverlog.log
You will need to change it into to start ServerEx:
Code:
start .\Binaries\win32\ROGame TE-Apartments[COLOR="Yellow"]?mutator=ServerEx.ServerEx[/COLOR]?MinPlayers=0?MaxPlayers=14 -seekfreeloadingserver -multihome=62.149.197.159 -port=7787 -log=serverlog.log
 

demiro86

FNG / Fresh Meat
Sep 30, 2014
41
0
0
hnhitaclan.forumfree.it
In that log no reference if present that indicates that you are trying to start the ServerEx mutator. It's also not on your servers command line. According the log, this is your current command-line:
Code:
Init: Command line: SERVER TE-Apartments?MinPlayers=0?MaxPlayers=14 -seekfreeloadingserver -multihome=62.149.197.159 -port=7787 -log=serverlog.log
You will need to change it into to start ServerEx:
Code:
start .\Binaries\win32\ROGame TE-Apartments[COLOR="Yellow"]?mutator=ServerEx.ServerEx[/COLOR]?MinPlayers=0?MaxPlayers=14 -seekfreeloadingserver -multihome=62.149.197.159 -port=7787 -log=serverlog.log
Nice

Now works