• Please make sure you are familiar with the forum rules. You can find them here: https://forums.tripwireinteractive.com/index.php?threads/forum-rules.2334636/

Darkest Hour: Normandy 1944

erghh... RTR mates, Our arrangement with you guys broke down because there was almost no communications between RTR & DH. I'm sorry but we couldn't let an over delayed Beta server slow the team's progress down so we made new mates, we're not blaming anyone it's just the way it had to pan out :)
What you have there is the very first build of DH ever made, the game equivalent of a half arsed primary rehearsal. We have made about 6-7 new builds since that one. It's as good as garbage now so you might find use for it if you wanted to prop up some stuff in your desktop recycle bin.
 
Upvote 0
For instance our 32valve B-2 s.b. Chevy heads were put on a basic 350 cu.in. motor.
This motor consisted of: 10:1 compression, single plane street aluminum intake manifold, standard early LT1 hydraulic roller cam, 750 cfm. Holley carb. .Which produced 475 horse power @ 6,000 RPM that’s 203horse power more than a stock iron head, 159 horse power more than a very well known aluminum 2valve (CNC ported) head . As far as torque is concerned we walked away again. With producing 437 ft. lbs @4500 RPM leaving the aluminum 2valve 56 ft. lbs. behind and the iron heads 82 ft. lbs. behind.
When the aluminum 2valve and iron heads stopped making torque and started going backwards. Our heads kept going (almost like the Energizer Bunny!) at 6,000 RPM still producing over 415 ft. lbs. of torque. Leaving the aluminum 2valve heads behind by 139 ft lbs. of torque . the iron head was then behind by a pathetic 177ft.lbs. of torque.
We then decided to play around with the jetting and little bigger camshaft and produced just under 600 horse power. Keep in mind this was all done with our B-2 series head .
Which is what we consider our baby head due to the B-3 , C-2, C-3, Raised Runner, and HIGH Port, are 5 more levels above the B-2 series. In turn a 1,000 Horse Power naturally aspirated small block can be achieved with the right combination.
For those of you out there who still want more!
You can add a BLOWER, TURBO, or NITROUS !
Which are all compatible with all of our 32valve head packages.
 
Last edited:
Upvote 0
AR10T.jpg


Pictured with 20 round magazine
and optional scope
MODEL: AR - 10(T) CALIBER: .308/7.62MM UPPER RECEIVER: FORGED FLATTOP TRIGGER: TWO STAGE NM BARREL: 24" SST T HEAVY RIFLING TWIST: 1:11.25 INCH FRONT SIGHT BASE: GAS BLOCK MUZZLE DEVICE: NONE OVERALL LENGTH: 43.5 INCHES WEIGHT: 10.4 POUNDS ACCURACY: 1" GROUPS AT 100 YARDS (1MOA) COMPLETE WITH: TWO 10 ROUND MAGAZINES.
OWNERS MANUAL
LIFETIME WARRANTY
 
Last edited:
Upvote 0
I was personally in your Vent server several times during the period that we were changing all our servers over to a new provider. Each time I came into your Vent server there was not a soul in there. We had never set up a mod in RO and asked for input from you guys several times about helping set the server up. Your response was that you did not know how to set your own mod up as a dedicated server. We are sorry both RTR and DH wasted time with this, best of luck with your mod.
 
Upvote 0