Important Server Config Settings

[[TW]Ramm-Jaeger]

I thought it would be good to highlight some of the more important server config options. Many of these options can be set in KillingFloor.ini or passed in on the commandline. Most can also be found in the webadmin tools.

GameDifficulty: - Set in the KillingFloor.ini, Commandline, or Webadmin
GameDifficulty (what you'll find in KillingFloor.ini)
Difficulty (What you'd pass in to set this on the commandline)

This sets the difficulty level for the game.
1.0 = Beginner - Your grandma can play the game
2.0 = Normal - Quite challenging with lower level perks
4.0 = Hard - Very challenging even with mid level perks
7.0 = Suicidal - Incredibly difficult, even with high level perks

KFGameLength Set in the KillingFloor.ini or in Webadmin
Sets the length of the game (how many waves the players fight through).

0 = Short - A 4 wave game
1 = Normal - The standard 7 wave game
2 = Long - The longer 10 wave game
3 = Custom - uses the custom sandbox settings for waves, monster counts, etc (which i won't go into here, but we'll talk about in another post).

Those are the two big KF specific settings. For more of the Unreal specific settings check some of the other posts on this forum.

[SnakeDiver]

Hi.

I looked in my KillingFloor.ini and did not see a GameDifficulty command. You sure that's what it's called? Or does it have to be added?

[Psycho_Sam]

sticky this please?

[Dragonshadow]

Originally Posted by SnakeDiver

Hi.

I looked in my KillingFloor.ini and did not see a GameDifficulty command. You sure that's what it's called? Or does it have to be added?

Same here, dunno what to do.

[excis3r]

I noticed that instead of numbers for KFGameLength...there is GL_Normal. Should we input GL_Long or just put a 2 or with either work?

[Mustang]

[Engine.GameInfo]
GameDifficulty=4.0

[murphIV]

Originally Posted by excis3r

I noticed that instead of numbers for KFGameLength...there is GL_Normal. Should we input GL_Long or just put a 2 or with either work?

I have the same question, my server is set to GL_Normal but want the long rounds.

[SnakeDiver]

It's GL_Long.

[Feelgood66]

Originally Posted by SnakeDiver

Hi.

I looked in my KillingFloor.ini and did not see a GameDifficulty command. You sure that's what it's called? Or does it have to be added?

They are both there in the INI file. Do a quick search and youll find them.


Thanks to these, I added an additional server. The third server is now HARD mode with 7 waves. Gotta love it!

East Coast USA

London, England

Central USA - HARD mode with 7 waves!

[SixFour]

How exactly do I utilise these with a webadmin service such as : http://img41.imageshack.us/img41/4075/kfwebadmin.jpg

I've tried putting in things like GameDifficulty=4.0 or set_gamedifficulty 4.0 but there have been no notable changes in-game from beginner difficulty setting or notifications in the console, even when I change maps. Does the server need to be restarted? Or is there a different command?

[DirtyRat]

I would suspect a server restart woudl be in order.



I've now made TheDarkSideofGaming.com server on hard difficulty.

Thanks for posting this Ramm, we all found beginner a little too easy.

[Chameleon]

Originally Posted by SixFour

How exactly do I utilise these with a webadmin service such as : http://img41.imageshack.us/img41/4075/kfwebadmin.jpg

I've tried putting in things like GameDifficulty=4.0 or set_gamedifficulty 4.0 but there have been no notable changes in-game from beginner difficulty setting or notifications in the console, even when I change maps. Does the server need to be restarted? Or is there a different command?

I want to know the EXACT same thing...

I couldn't figure out how to change my Server's GameDifficulty while the server was running. I tried all sorts of commands, but nothing seemed to work. It would be really helpful to see a list of all the different Admin console commands available.

Thank You!

[Killing]

Originally Posted by SixFour

How exactly do I utilise these with a webadmin service such as : http://img41.imageshack.us/img41/4075/kfwebadmin.jpg

I've tried putting in things like GameDifficulty=4.0 or set_gamedifficulty 4.0 but there have been no notable changes in-game from beginner difficulty setting or notifications in the console, even when I change maps. Does the server need to be restarted? Or is there a different command?

Making it much to hard there SixFoor, just use the UI: Defaults -> Game -> Difficulty

[GivinPain]

Guys, just so you know, the killingfloor.ini file is not always there, and if it is, some of the commands aren't there by default. In windows it's only created AFTER the server is started for the first time. In linux, I don't know how it is created. I had to add the gamedifficulty command manually for my windows servers.

So, I'm just saying, you can't be sure that the file will be there, even if it was there for your install.

[SnakeDiver]

Originally Posted by Feelgood66

They are both there in the INI file. Do a quick search and youll find them.

Thanks for that enlightening post. I think I know how to use CTRL+F. They were not in the file. They appeared after I used WebAdmin and set it though.

For those who need to add it manually. It goes under: [Engine.GameInfo]

GameServers, for some reason or another, has decided to remove it from the default.ini and the KillingFloor.ini.

[Feelgood66]

Originally Posted by SnakeDiver

Thanks for that enlightening post. I think I know how to use CTRL+F. They were not in the file. They appeared after I used WebAdmin and set it though.

For those who need to add it manually. It goes under: [Engine.GameInfo]

GameServers, for some reason or another, has decided to remove it from the default.ini and the KillingFloor.ini.

Umm sorry, but I would have to guess the error was in fact on your part. Those commands are and were in fact in the KillingFloor.ini file. Either you typed something in wrong, or something. All three of my servers are from Gameservers, and all three had the commands in their ini files. Are you sure you know how to use the CTRL-F feature? And are you sure you spelled it correctly?

[lawlers]

Originally Posted by Feelgood66

Umm sorry, but I would have to guess the error was in fact on your part. Those commands are and were in fact in the KillingFloor.ini file. Either you typed something in wrong, or something. All three of my servers are from Gameservers, and all three had the commands in their ini files. Are you sure you know how to use the CTRL-F feature? And are you sure you spelled it correctly?

Wrong. I rented my Gameservers yesterday and it had the GameDifficulty in the .ini but because of the worst server browser I've ever seen in my life (I could see my server fine in the browser BEFORE the patch was released), I thought reinstalling it would help and I noticed with the 'new, default' KF.ini, alot of text had changed and the Game Difficulty setting had disappeared completely

[dimitrifrom31]

Originally Posted by Feelgood66

And are you sure you spelled it correctly?

that is ironic

[moltn]

Originally Posted by SnakeDiver

Hi.

I looked in my KillingFloor.ini and did not see a GameDifficulty command. You sure that's what it's called? Or does it have to be added?

[Engine.GameInfo]
GoreLevel=2
MaxSpectators=12
MaxPlayers=32
AutoAim=1.000000
GameSpeed=1.000000
bChangeLevels=True
bStartUpLocked=False
bNoBots=True
bAttractAlwaysFirstPerson=False
NumMusicFiles=13
HUDType=Engine.Hud
MaxLives=0
TimeLimit=0
GoalScore=0
GameStatsClass=IpDrv.MasterServerGameStats
SecurityClass=UnrealGame.UnrealSecurity
AccessControlClass=Engine.AccessControl
VotingHandlerType=xVoting.xVotingHandler
MaxIdleTime=10.000000
bAllowBehindView=False
bAdminCanPause=True
bWeaponShouldViewShake=True
bLowGore=False
bLargeGameVOIP=False
GameDifficulty=4.000000
MaplistHandlerType=
ServerSkillLevel=
bIgnore32PlayerLimit=False
bVACSecured=True
bWeaponStay=True
bAllowWeaponThrowing=True
ResetTimeDelay=0

[kurogane]

YA I RUN A SERVER AND I HAVE BIN TRYING TO CHANGE THE GAME LENGTH AND ADD NEW MAPS AND IT WILL NOT WORK I TRYED IT AS GL_Long and it will not work i tryed it as =2 and it will not work and someone help me out it making me mad i changed the servers name it took like 3 days for it to work